Contributing to a greener future, we are committed to providing the best greening concepts, quality and services to protect and enhance the built environment.
Formdex Plus is a special blend of cement, quartz sand and proprietary chemicals in powder form for the permanent protection of concrete against water penetration.
Nuraprufe 415 (Self-Adhesive) membrane is unique as it is made up of composites sheets comprising a thick HDPE film and a highly sensitive adhesive that gives an excellent bond to the surface it is installed on.
Nuraprufe 415 membranes are applied horizontally to prepared lean concrete or well rolled and compacted sand or crushed stone blinding.
FORMDEX ADMIX is a chemical admixture in powdered form used in the waterproofing and protection of concrete structures.
FORMCEAL 3000X is a self-adhesive bituminous membrane obtained by the hot lamination of a modified bitumen compound with a cross laminated high density polyethylene film (HDPE).
FORMCEAL TYPE-R is a single component; pure polyurethane, liquid applied waterproofing membrane that cures to form an elastomeric membrane that offers root resistant and waterproofing protection to the areas it is applied on.
Formrok Polyurea 3K is a two-component, highly elastic, liquid-applied hybrid polyurea coating system engineered for superior thermal stability and long-term ageing resistance. This coating is ideal for wide range of application as waterproofing, protective, and sealing coating.
Formrok Polyurea 2K is a fast-curing, two-component spray-applied system that creates a durable, seamless, and highly flexible waterproof membrane. It is well suited to use for carparks, decks and roofs, providing outstanding resistance to water, chemicals, and abrasion while allowing rapid return to service.
Formrok Polyurea 1K is a polyurea system to create a complete, waterproof, integral seamless vehicular traffic wearing surface (on new or old concrete surfaces).
SEALFLEX is a high- build, heavy-duty, flexible and elastomeric waterproofing coating for exterior walls. It is especially designed for EXTERIOR use under a variety of conditions.
Formwal 622 is a waterbased, acrylic,semi-gloss topcoat for interior and exterior use.
Formrok 300 TFC is a single component, water based polyurethane copolymer topcoat designed for use as a protective coating on Formdex APO1 (APCC) topping or other concrete surfaces. It is specially formulated to form a tough homogeneous layer with high slip, abrasion and stain resistant surface.
Formdex APO1 is a two-component pre-packed high performance acrylic polymer modified cement based mortar designed for all typed of re-surfacing, patching and repairing of the concrete surface.
NURAPLAN waterproofing membranes are PVC based materials, specially formulated to waterproof roofs, decks, patios, gutters, tanks, ponds, tunnels, channels and roof gardens.
Formdex Uniflex Type-R is 100% compatible to masonry structures and can receive plastering or protection screed.
FORMCEAL TYPE-R is a single component; pure polyurethane, liquid applied waterproofing membrane that cures to form an elastomeric membrane that offers root resistant and waterproofing protection to the areas it is applied on.
FORMCEAL TYPE-R is a single component; pure polyurethane, liquid applied waterproofing membrane that cures to form an elastomeric membrane that offers root resistant and waterproofing protection to the areas it is applied on.
Acryl-cote is a single component water-base terpolymer liquid membrane system which cures to form a tough, flexible, coloured waterproof protective membrane.
TRAFFIGARD is a decorative, liquid-applied membrane of heavy-bodied acrylic polymer gel.
NURAPLAN waterproofing membranes are PVC based materials, specially formulated to waterproof roofs, decks, patios, gutters, tanks, ponds, tunnels, channels and roof gardens.
Metalcoat M80 is a waterbased modified acrylic / synthetic rubber emulsion designed to waterproof metal and asbestos roof.
Formceal P3PL/A - A torched on waterproofing membrane, is based on a distilled bitumen compound modified with APP plastomeric polymers.
Formak 629 is a single component, solvent free liquid applied elastomeric waterproofing membrane based on POLYISOPRENE polymers.
Deckgard 80 is a water-based modified acrylic emulsion designed as a one-pack, liquid-applied coating which is tough, durable, elastic and waterproof.
Formdex Uniflex Type-R is 100% compatible to masonry structures and can receive plastering or protection screed.
FORMCEAL TYPE-R is a single component; pure polyurethane, liquid applied waterproofing membrane that cures to form an elastomeric membrane that offers root resistant and waterproofing protection to the areas it is applied on.
Formdex is a two component cementitious waterproofing system membrane that offers an effective and permanent waterproofing solution to concrete structures.