Contributing to a greener future, we are committed to providing the best greening concepts, quality and services to protect and enhance the built environment.
Acryl-cote Solvent Primer is a solvent based acrylic primer for dense, smooth or powdery substrates.
Nuraprufe 415 (Self-Adhesive) membrane is unique as it is made up of composites sheets comprising a thick HDPE film and a highly sensitive adhesive that gives an excellent bond to the surface it is installed on.
Nuraprufe 800 membranes is unique as it is made up of composites sheets comprising a thick HDPE film, an aggressive pressure sensitive adhesive and a trafficable weather resistant protective granular layer.
Nuraprufe SS Tape is a specially formulated tape for used together with Nuraprufe 415 high performance membrane.
Nuraprufe Tape is a specially formulated two sided pressure sensitive tape.
Nuraprufe Seal is a thick black bituminous waterproofing compound specially formulated with micro-fiber to form a semi-stiff paste.
Nuraprufe 415 membranes are applied horizontally to prepared lean concrete or well rolled and compacted sand or crushed stone blinding.
FORMDEX ADMIX is a chemical admixture in powdered form used in the waterproofing and protection of concrete structures.
FORMCEAL 3000X is a self-adhesive bituminous membrane obtained by the hot lamination of a modified bitumen compound with a cross laminated high density polyethylene film (HDPE).
FORMCEAL TYPE-R is a single component; pure polyurethane, liquid applied waterproofing membrane that cures to form an elastomeric membrane that offers root resistant and waterproofing protection to the areas it is applied on.
Tecnocoat P-2049 is a PUA system to create a complete, waterproof, integral seamless vehicular traffic wearing surface (on new or old concrete surfaces).
Deckgard Solvent Primer is a solvent based acrylic primer for dense, smooth or powdery substrates.
Sealflex Solvent Primer is a solvent based acrylic primer for dense, smooth or powdery substrates.
Sealflex Primer is a waterbased 100% acrylic primer for concrete and plaster.
SEALFLEX is a high- build, heavy-duty, flexible and elastomeric waterproofing coating for exterior walls. It is especially designed for EXTERIOR use under a variety of conditions.
Formwal 622 is a waterbased, acrylic,semi-gloss topcoat for interior and exterior use.
Metalcoat Solvent Primer is a solvent based acrylic primer for dense, smooth or powdery substrates.
Nuraplan AD is a one-part, cold applied water-borne adhesive that provides good adhesion between Nuraplan membranes and masonry substrate such as plastered wall, and concrete.
Nuraprufe SS Tape is a specially formulated tape for used together with Nuraprufe 415 high performance membrane.
Nuraprufe Tape is a specially formulated two sided pressure sensitive tape.
Nuraprufe Seal is a thick black bituminous waterproofing compound specially formulated with micro-fiber to form a semi-stiff paste.
Formdex Uniflex Type-R is 100% compatible to masonry structures and can receive plastering or protection screed.
FORMCEAL TYPE-R is a single component; pure polyurethane, liquid applied waterproofing membrane that cures to form an elastomeric membrane that offers root resistant and waterproofing protection to the areas it is applied on.
DAKU Green Roof is a unique way of putting back the greenery into the surrounding by converting roof tops, decks into roof gardens. It is the roof greening system for creating both “intensive” and “extensive” gardens.
Acryl-cote Solvent Primer is a solvent based acrylic primer for dense, smooth or powdery substrates.
Nuraplan AD is a one-part, cold applied water-borne adhesive that provides good adhesion between Nuraplan membranes and masonry substrate such as plastered wall, and concrete.
Metalcoat Solvent Primer is a solvent based acrylic primer for dense, smooth or powdery substrates.
Deckgard Solvent Primer is a solvent based acrylic primer for dense, smooth or powdery substrates.
FORMCEAL TYPE-R is a single component; pure polyurethane, liquid applied waterproofing membrane that cures to form an elastomeric membrane that offers root resistant and waterproofing protection to the areas it is applied on.
Acryl-cote is a single component water-base terpolymer liquid membrane system which cures to form a tough, flexible, coloured waterproof protective membrane.
TRAFFIGARD is a decorative, liquid-applied membrane of heavy-bodied acrylic polymer gel.
NURAPLAN waterproofing membranes are PVC based materials, specially formulated to waterproof roofs, decks, patios, gutters, tanks, ponds, tunnels, channels and roof gardens.
Metalcoat M80 is a waterbased modified acrylic / synthetic rubber emulsion designed to waterproof metal and asbestos roof.
Formceal P3PL/A - A torched on waterproofing membrane, is based on a distilled bitumen compound modified with APP plastomeric polymers.
Formak 629 is a single component, solvent free liquid applied elastomeric waterproofing membrane based on POLYISOPRENE polymers.
Deckgard 80 is a water-based modified acrylic emulsion designed as a one-pack, liquid-applied coating which is tough, durable, elastic and waterproof.
Sealflex Solvent Primer is a solvent based acrylic primer for dense, smooth or powdery substrates.
Sealflex Primer is a waterbased 100% acrylic primer for concrete and plaster.
Formdex Uniflex Type-R is 100% compatible to masonry structures and can receive plastering or protection screed.
FORMCEAL TYPE-R is a single component; pure polyurethane, liquid applied waterproofing membrane that cures to form an elastomeric membrane that offers root resistant and waterproofing protection to the areas it is applied on.
Formdex is a two component cementitious waterproofing system membrane that offers an effective and permanent waterproofing solution to concrete structures.